MIP520
Universal low cost Industrial SBC with 5x86 CPU by MPL
KEY FEATURES
- Low-cost emedded control application
- VGA interface for flat panel and CRT, E-IDE and FDD port, one parallel and two serial ports
- Keyboard and mouse interface, SSI, speaker output and one timer interface and a real time clock
OVERVIEW
The MIP520 is a highly integrated industrial single board computer in PC/104 form factor. It is fully PC/AT compatible and well suited for applications requiring a small size, high performance PC with great flexibility. The MIP520 can be used in a standard operating environment without the need of a fan.
All major components required to build a complete and sophisticated PC/AT system are implemented on the MIP520 board. It features a VGA interface for flat panel and CRT (simultaneous panel and CRT operation possible), an E-IDE and FDD port, one parallel and two serial ports, keyboard and mouse interface, SSI, speaker output and one timer interface and a real time clock. Optional you have the possibility for Ethernet and/or USB controller on board. With the integrated 16-bit PC/104 interface, flexible expansion possibilities are also available.
All connectors are standard 2mm headers for an easy connection, except the FDD port (34-pin, 2.54mm connector) and the Ethernet connector (RJ45). Particular precaution has been taken of the EMC so that an entire system can fulfill the CE and FCC requirements.
The MIP520 to the ideal solution for any low-cost embedded control applications, where a flexible and fully compatible PC/AT is needed.
SPECIFICATIONS
| Electrical | |||
|---|---|---|---|
| Processor | AMD ÉlanTM SC520 32-Bit, lower power CPU, integrated PCI host bridge, SDRAM controller and RTC |
Industry-standard Am5x86-133MHz 133MHz operating frequency, 16kbytes write-back/through cache |
|
| BIOS | 256kB Flash EEPROM, easy update | MPL BIOS based on GS source | |
| SDRAM | 144-pin SO-DIMM socket for one module | Up to 128MB SDRAM | |
| FLASH | 44-pin header for Flash modules | Up to 160MB Flash | |
| RTC | backed with on- board Battery battery | ||
| SVGA Interface | C&T69000 video accelerator resolution up to 1280 x 1024 flexible panel support for STN and TFT |
15-pin DSUB refresh rate up to 85Hz 50-pin socket, for DLS, DLP & REMMI* options |
|
| 2 (RS232) or 4 (2xRS232 + 2xTTL) Serial Ports | Configurable as COM1 ... 4 one configurable as IrDA |
Available over 50-pin connector and 12-pin header | |
| Synchronous Serial Interface (SSI) | Half or full duplex operation Programmable clock speed from 64k to 8MHz Configurable clock idle state and phase Transaction complete status, available as interrupt |
Available over 10-pin header | |
| 2 x USB Interface | USB 1.1 (up to 12Mb/s) | 10-pin header | |
| Parallel Port | config. as LPT1...3, SPP,EPP, ECP (IEEE1284) | Available over 50-pin header | |
| E-IDE Port | ANSI standard modes 0, 1, and 2 | Standard 44-pin header | |
| FDD Port | one port for up to 2 drives | Standard 34-pin header | |
| Keyboard | PS/2 interface | Available over 50-pin header | |
| Mouse | PS/2 interface | Available over 50-pin header | |
| Ethernet | 10BaseT /100BaseTX Fast 10/100Mbit/s |
RJ45 support IEEE802.3 auto negotiation |
|
| Timer | One 16 or 32bit TTL timer output signal One 16 bit TTL timer input signal |
Available over 10-pin header | |
| Speaker Port | Easy connection of speaker | Available over 10-pin header | |
| Watchdog | distinct keyed write sequence | Programmable time-out 0,5msec – 32sec. | |
| Reset Button | Remote button | Connection over power connector | |
| Expansions | Via the 16-bit PC/104 interface | MIP520 is a stack through module | |
| Physical / Power | |||
| Size | 95.9 mm x 90.2 mm + 2 x 12.7 mm | 3.775” x 3.550 + 2 x 0.495” | |
| Overall heights | 14 mm | 0.551” | |
| Weight | 110 g | 0.242 lbs | |
| Input power | +5VDC ±5% | ||
| Power consumption | typically 4.0 Watts | 5VDC and 64MB SDRAM | |
| Temperature Range | -20°C up to 60°C, optional -40°C up to 75°C | Without a fan | |
| Humidity | 5% - 95%non condensing | Optional coating available | |
| MIP520 versions | Expansions & options | Operation systems | |
|---|---|---|---|
| – complete version – depopulated versions - w/o Ethernet - w/o Graphic - customer specific |
– any PC/104 card – MMI – REMMI* *Remote MMI option for an operation distance of up to 15 m with connectors for RS232, mouse, keyboard and USB next to the LCD. |
100% PC/AT compatible therefore any PC operating system (Windows, LINUX, RT OS....) can be usedFor other requirements please contact MPL AG | |
ORDER INFORMATION
| Reference | Description |
|---|---|
| MIP520-1 | PC/104 CPU board 5x86-133MHz, Graphics, 2x USB, 4x RS232, 10/100 Ethernet, REMMI I/F |
| MIP520-Cx | Depopulated MIP520 (e.g. no graphics and/or no 2xUSB, 10/100 Ethernet) |
| XTEST-2 | Extended temperature test -40°C up to +75°C |
CONTACT US
Tusk Embedded Technologies
Toll free: 1.855.468.8875
Local: 604.200.7965
