Xtreme I/O Opto

PCI-104 48-channel Isolated Digital I/O MOdule

Xtreme I/O Opto

KEY FEATURES

  • PCI-104 & PC/104-Plus Compliant
  • 48 Isolated Digital I/O Channels
  • 3kV isolation on all channels
  • FPGA Register Controlled Device (jumpers are not required)
  • Interrupt Generation Capability
  • +0 to +40V DC Voltage Range
  • Extended Temperature Range -40°C to +85°C

OVERVIEW

Connect Tech’s Xtreme I/O Opto is a 48-channel isolated PCI-104 Digital I/O board grouped with 24 optically isolated inputs (24-bit) and 24 optically isolated outputs (24-bits). The flexibility of the FPGA technology allows integration and customization to meet application requirements.

Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system.

The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.

SPECIFICATIONS

Inputs
  • 24 optically isolated inputs (24-bits)
 
  • Wide input voltage range from +0 up to +40V DC
 
  • Independent grounds and reverse voltage protection
 
  • Selectable interrupt generation on any input signal (change of state, rising or falling edge)
 
  • 1.8kOhm current limiting series resistor on each input
Outputs
  • 24 optically isolated outputs (24-bits)
 
  • Wide output voltage range from +0 up to +40V DC
 
  • Open collector configuration with common emitters
 
  • Individual selectable output voltage levels with a 4.7kOhm pull up
 
  • Maximum output current: 8mA
Connectors   2x25 (50 position) 0.1” (DIL) pin headers available in vertical or right angle
Bus   PCI-104 (PC/104-Plus)
Optical Isolation   3kV RMS
Control/Addressing
  • FPGA Register Controlled Device (No jumpers needed)
 
  • Custom logic available upon request
Operating Temperature   -40ºC to 85º C (-40º F to 185º F)
Dimensions   Fully PCI-104 compliant: 3.775” x 3.550”
Bus   PCI-104 (PC/104-Plus), ISA (PC/104) connector can be optionally installed as a pass-through connector
Software Compatibility
  • Custom CTI Device Drivers for QNX, Linux, Windows
 
  • Device can also be controlled directly from a memory mapped register set in any operating system

ORDER INFORMATION

Part Number: Description
DAG001 Xtreme/IO includes 24 inputs and 24 outputs of Digital I/O, 0-+40V input voltage, PCI-104. 3kV Optical Isolation
DAG003 Xtreme/IO ADC-DAC has 32 Single Ended / 16 differential channels of 16-bit 100Ksps Analog Inputs, 4 channels of 16-bit Analog Outputs and 16-bits of bidirectional digital IO

CONTACT US

Tusk Embedded Technologies

Toll free: 1.855.468.8875
Local: 604.200.7965

sales@tuskembedded.com

DOWNLOADS