PIP7
Celeron® M 600 MHz Embedded PC - Available only in higher quantity for small volume please use PIP8 by MPL
KEY FEATURES
- Wide temperature range (-40°C/+75°C)
- Long term availability
- Expansion via PC/104, PC/104-Plus, PCI, PMC
- Fanless operation
- Additional functions easy to add
- Complete family all in the same housing
- For small volume quantities, please use PIP8
OVERVIEW
The PIP8 is a highly integrated and robust Packaged Industrial PC with the low power Celeron M 1.0 GHz processor out of Intel's long term availability Embedded Program. The PIP8 complements the existing PIP Product family that represents a unique solution for today's demanding industrial needs. PIPs are available in various options and are built into a extreme compact EMI/RFI sealed aluminum chassis. They can be operated under extreme as well as under normal conditions without the need of fans. All MPL PIP solutions can be assembled according to your needs.
The PIP8 Specialities
Among many specialities the extreme low power consumption is extraordinary, depending on the application running it is typically 10 Watt up to 16 Watt.
The PIP8 to the ideal and compact solution where high processing power, long term availability, low power consumption and high quality is needed. The PIPs are used in telecom, medicine, vehicles, office as well as in any industrial applications.
SPECIFICATIONS
| Board Key Data | ||
|---|---|---|
| Processor | Low Power Embedded Celeron M CPU, 600MHz 512 kB level 2 cache |
64-Bit data bus CPU in Intel's long-term supply program |
| Chip Set | Intel 855GME & 6300ESB | 400MHz front Side bus |
| BIOS | 1MB Flash EEPROM, easy BIOS update | MPL engineered BIOS (General Software) |
| Memory | Up to 1GB memory, with or without ECC | 200-pin SO-DIMM socket for one DDR333 module |
| FLASH | Two 44-pin headers for Flash modules or disks | Can be used with any available Flash |
| RTC | backed with on-board battery, field exchangeable | CMOS setup can be saved in EEPROM |
| Watchdog Timer | 2 stages, independent count values for each stage | Configurable granularity from 1µ to 10 min |
| Indicators | 8 two-color LEDs, 6 active + 2 user definable | Power, Reset, HDD, IEE1394b, 2x LAN |
| Temperature Sensor | Monitors CPU temperature, on-board memory, power supply, as well as PCB board temperature | |
| Interfaces | ||
| Graphic | Intel IGD (Integrated Graphics Device) 250MHZ graphics core with 2D and 3D engine Optional dual panel support available |
Digital-Video on DVI-I connector max. 1920x1200 Analog-Video on DVI-I connector max. 2048x1536 LVDS ports on 1.27 header, 1920x1200 (WUXGA) |
| 3 x USB 2.0 | 2 ports external, 1 port internal | 2 x Type A connectors, ESD protected, bootable |
| 1 x Ethernet | 10BaseT /100BaseTX | RJ45 connector, ESD protected, auto negotiation |
| 4 x Serial Ports | 2 ports fix RS232 2 ports optionally via RS232 or RS422/485 modules |
2 x 9-pin D-SUB, ESD protected Transfer rates up to 230.4 kBaud |
| 2 x E-IDE Ports | Up to 4 drives PIO mode 4 and Bus Master IDE | 2 x standard 44-pin header |
| 2 x PS/2 | For keyboard and mouse | 2 x 6-pin mini DIN connector, ESD protected |
| Parallel Port | SPP, EPP, ECP (IEEE1284) | 25-pin D-SUB connector, ESD protected |
| Floppy | Supported via LPT, USB or ext. FDD port | Optional connection for external device |
| Power/Reset Button | On chassis (protected) and remote buttons | ATX functionality, ESD protected |
| PC/104-Plus | 8/16 bit memory and I/O ISA-Interface (PC/104) 32 bit PCI interface (PC/104-Plus) |
Up to 4 PC/104-Plus bus master cards |
| Physical / Power | ||
| Power | 8 - 28VDC input range, optionally up to 48VDC | Consumption typically 16W |
| Temperature Range | -20°C up to 60°C, optional -40°C up to 75°C | No fan, no openings, values at full CPU load |
| Humidity | 5% - 95% non condensing | Optional coating available |
| Standard Compliance | ||
| The PIP7 is designed to meet or exceed the most common standards. Particular references are: | ||
| EMC | EN 55022, EN 55024, EN 61000, MIL-STD-461E | |
| Shock & Vibration | EN 60068 | |
| Environmental & Safety | EN 50155, MIL-STD-810-F, EN 60601, EN 60950 | |
| Approval Lists | CE, EN 60945, IACS E10 | |
Housing Options
| Standard PIP Housings | ||
|---|---|---|
| Chassis | Rugged chromated aluminum with EMI protection | DIN-rail, flange mounting, no ventilation holes |
| Size | Footprint DIN-rail mounting: 270 x 162 mm, Footprint Flange mounting: 310 x 162 mm Height: 62 / 83 / 120mm |
10.6 x 6.4 inch 12.2 x 6.4 inch 2.4 / 3.3 / 4.7 inch |
| Weight | approx. 2.2kg | 4.85 pounds |
| Colors | RAL5024 standard MPL blue RAL7016 anthracite gray |
Optional customer specific color / top foil |
| OEM PIP Housings | ||
| Customized PIP solutions | with OEM specific color and/or foil | with OEM specific front plates (customized cutouts and/or engraved or labeled ports) |
| MIL Housings | ||
| Chassis | Rugged IP67 protected aluminum housing | Connectors according to customer needs |
| Size | 304 x 234 x 75 mm (L x W x H) without connectors | 4x M5 tapped holes for chassis mounting |
| Color | black | Optional customer specific color |
| Open Frame / OEM cooling plate | ||
| Customer specific cooling plate | PIP CPU board mounted on a cooling plate from a customer | Solution needs to be discussed prior to offer |
Optional Features
| Add-on Modules | ||
|---|---|---|
| AC97 Sound Module | Line IN, Line OUT, Headphone & MIC | All available on 3.5 mm jacks |
| CAN Bus Extension | Internal isolated CAN 2.0 module | External available on DB-9, ESD protected |
| Dual Display Expansion | Additional 2nd digital graphic port | External available on DVI connector |
| Ethernet Media Converter | Copper to fiber optic converter | special PIP built-in version |
| Extended Input Range | For 18-48V input range | Isolated 50W output |
| PCI slots | Standard PCI slot extensions for PIPs | up to 4 PCI slots and additional PCI-104 cards |
| PMC slots | PMC extension of the 82,5mm PIP | up to 3 PMC and 1 PCI-104 card |
| RS232 or RS422/485 | External available on DB-9, ESD protected | up to 2 modules possible |
| Serial GPS Module | Supports TSIP, TAIP & NMEA | Mounted on one of the optional serial ports |
| UPS Extension | Internal UPS module | For save shutdown (or autonomous operation) |
| WLAN Module | Supports 802.11b/g/n | Connected to the internal USB port or Mini PCIe |
ORDER INFORMATION
CPU Board Versions
| Reference | Description |
|---|---|
| PIP7-11 | Low Power embedded Celeron M 600MHz with 512kB L2 Cache, DDR RAM memory socket, 3D Graphic (DVI-I), 2x USB2.0, 2x RS232, 10/100 Ethernet, PC/104... |
| PIP7-Cx | PIP Solution assembled & mounted according to customer needs & requirements (e.g. with or without housing, depopulated parts, installation of specific connectors, installing a customers application, etc.) |
| PIP7-1 | Discontinued Product Low Power embedded Pentium III 400MHz with 256kB L2 Cache with on-board CAN, SXGA, 2x USB1.1, 4x RS232, 10/100 Ethernet, SCSI-2, PC/104.... |
Extended Temperature Option
| Reference | Description |
|---|---|
| XTEST-2 | extended temperature test -40° C up to +75° C |
For deployment in harsh environments, the PIP7 can be ordered in an extended temperature version. Every system needs to pass various tests in a environmental chamber to prove that it will perform flawless over the temperature range indicated.
Please note: In order to get a system that will operate under these conditions, all additional selected components like hard disks or extension cards have to be specified or tested for conformity to the extended temperature range.
CONTACT US
Tusk Embedded Technologies
Toll free: 1.855.468.8875
Local: 604.200.7965
