WAFER-CV-D25502/N26002
3.5” SBC supports Intel® Atom™ D2550/N2600 processor with 2GB DDR3 memory down, VGA/LVDS, Dual GbE, PCI-104, USB 2.0, SATA 3GB/s and Audio
KEY FEATURES
- 3.5” form factor supports Intel® Atom™ D2550/N2600 dual core processor with 2GB DDR3 memory down
- 12V only single voltage design for AT/ATX power
- 24-bit single channel LVDS via D2550 CPU or 18-bit single channel via N2600/N2800 CPU support
- Supporting PCI-104 and mSATA capabilities
- IEI One Key Recovery solution allows you to create rapid OS backup and recovery
- Dual GbE
SPECIFICATIONS
| CPU | Intel® dual core Atom™ D2550 1.86GHz processor Intel® dual core Atom™ N2600 1.6GHz processor Intel® dual core Atom™ N2800 1.86GHz processor (optional) |
| System Chipset | Intel® NM10 |
| BIOS | UEFI BIOS |
| System Memory | 1 x 1066MHz DDR3 SO-DIMM supporting up to 4GB (for D2550 and N2800) 1 x 800MHz DDR3 SO-DIMM supporting up to 2GB (for N2600) |
| Ethernet | Dual GbE by Realtek RTL8111E controllers |
| I/O Interface | 1 x RS-422/485 1 x 6-pin wafer for PS/2 KB/MS 3 x RS-232 2 x SATA 3Gb/s with 5V power connector 6 x USB 2.0 |
| Digital I/O | 8-bit digital I/O (4-bit input, 4-bit output) |
| Super I/O | Fintek F81866 |
| Audio | Realtek ALC662 HD audio codec |
| Display Interfaces | Dual display supported 1 x VGA (up to 1920 x 1200 @60Hz) (Due to Intel GMA driver limitation, the monitor connected to the VGA connector may not have signal to it or become extended desktop after restarting from the graphics driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey to switch the primary screen to CRT mode.) LVDS1 integrated in the D2550/N2600 Single-channel 24-bit LVDS by D2550, resolution support up to 1440x900 @60Hz Single-channel 18-bit LVDS by N2600, resolution support up to 1366x768 @60Hz LVDS2 supports 24-bit dual-channel by CH7511B DP to LVDS converter, resolution support up to 1920x1200 for D2550, 1600x1200 for N2600/N2800 |
| Expansion | 1 x Full-size PCIe Mini card slot supporting mSATA SSD storage 1 x Half-size PCIe Mini card slot |
| Watchdog Timer | Software programmable supports 1~255 sec. system reset |
| Power Supply | 12V only, AT/ATX support |
| Fan | 1 x 3-pin CPU fan connector 1 x 3-pin system fan connector |
| Power Consumption | 12V@1.53A (Intel® D2550 1.86GHz CPU with 1GB DDR3 1066MHz memory) 12V@1.15A (Intel® N2600 1.6GHz CPU with 1GB DDR3 1066MHz memory) |
| Graphic | GMA 3650 at 640MHz graphics core speed (for N2550 and N2800) GMA 3600 at 400MHz graphics core speed (for N2600) |
| Temperature | -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor -20°C ~ 70°C with free air, -20°C ~ 75°C with force air for N2600/N2800 processor |
| Humidity | 5% ~ 95%, non-condensing |
| Weight | GW: 600g/NW: 250g |
ORDER INFORMATION
| Part No. | Description |
| WAFER-CV-D25502-R10 | 3.5” SBC supports Intel® Atom™ D2550 1.86MHz processor with 2GB DDR3 memory down, VGA/LVDS, Dual GbE, PCI/104, USB 2.0, SATA 3GB/s and Audio |
| WAFER-CV-N26002-R10 | 3.5” SBC supports Intel® Atom™ N2600 1.6MHz processor with 2GB DDR3 memory down, VGA/LVDS, Dual GbE, PCI/104, USB 2.0, SATA 3GB/s and Audio |
| WAFER-CV-N28002-R10 | 3.5” SBC supports Intel® Atom™ N2800 1.86MHz processor with 2GB DDR3 memory down, VGA/LVDS, Dual GbE, PCI/104, USB 2.0, SATA 3GB/s and Audio (by project support, MOQ 100pcs / lot) |
| 32000-070301-RS | Dual ports USB cable |
| 32200-074800-RS | RS-422/485 cable |
CONTACT US
Tusk Embedded Technologies
Toll free: 1.855.468.8875
Local: 604.200.7965
