Xtreme/GbE Managed Carrier Ethernet Switch
PCIe/104 8-Port Carrier Grade Gigabit Ethernet Switch
KEY FEATURES
- 8 x 10/100/1000 Mbps Port Switch
- Vitesse VSC7428 Latest Generation 32-bit Switch Engine
- Web GUI or CLI Management
- Carrier Grade Ethernet Switching
- Available with RJ-45 or Rugged Locking Ethernet connectors
- Single Wide Range Input Voltage +9V to 36V
- Extended Temperature Range -40°C to +85°C
OVERVIEW
The CTI Xtreme/GbE Managed Carrier Ethernet Switch provides Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor.
Excellent for high-end applications such as Mobile and Microwave backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system. Powered by the latest generation Carrier Ethernet Switch engine the Vitesse VSC7428. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2 external memory and DMA-based frame extraction and insertion supports timing over packet, Ethernet OAM, and performance monitoring.
Available in models with RJ-45 or Rugged Positive Locking Headers makes this embedded Ethernet switch ideal for any type of environment.
SPECIFICATIONS
Ethernet Switch Engine | Vitesse VSC7428 Carrier Grade Ethernet Switch Chipset |
A powerful embedded 416 MHz RISC 32-bit CPU with DDR2 external memory and DMA-based frame extraction and insertion supports timing over packet, Ethernet OAM, and performance monitoring. | |
Memories | 1Gb DDR2 SDRAM |
128Mb Serial NOR Flash | |
Ports | 8 x Gigabit Ethernet (10/100/1000 Mbps) |
Connectors (PC Type and Rugged Type) | 8 x Low Profile RJ-45 (XDG004, XDG005, XDG006) |
8 x Rugged Positive Locking Headers (XDG007, XDG008, XDG009) | |
Layer 2 Switching | 802.1Q VLAN switch with 8K MACs and 4K VLANs |
Push/pop up to two VLAN tags | |
IPv4/IPv6 multicast | |
Policing with storm control and MC/BC protection | |
RSTP and MSTP support | |
Hardware and software based learning | |
Link aggregation (IEEE 802.3ad) | |
Independent and shared VLAN learning (IVL, SVL) | |
Jumbo frame support | |
Management Access | Web Interface |
RS-232 Serial Interface (CLI) | |
Software API | |
PCIe/104 Bus | |
Indicator LEDs | 2 LEDs per port (available on RJ-45 and through external connector) |
Power Rail LEDs | |
Status LEDs | |
Standalone Operation | Switch can be used as a standalone unit OR it can be paired with an embedded SBC. |
Input Voltage | Wide input rage: +9V to +36V DC with Reverse Polarity Protection. Can be powered from external connector OR directly from expansion bus. |
Power Consumption | Idle: 0.3A, 3.6W Typical: 0.35A, 4.2W Max: 0.5A, 6W (with +12V input) |
Bus Interface | no bus connector populated |
PC/104 bus pass through (for sourcing power only) | |
PCIe/104 bus (sourcing power and management interface) | |
Dimensions | PC/104 compliant: 3.775” x 3.550” |
Tallest Top Side Component: Heatsink 0.375” (9.5mm) | |
Operating Temp | 40°C to +85°C (chipset rated to +125°C thermals) |
ORDER INFORMATION
Part Number | Description |
XDG004 | No bus, RJ-45 connector |
XDG005 | PC/104 bus, RJ-45 connector |
XDG006 | PCIe/104 bus, RJ-45 connector |
XDG007 | No bus, Rugged locking header |
XDG008 | PC/104 bus, Rugged locking header |
XDG009 | PCIe/104 bus, Rugged locking header |