MAGBES
5 Port Manageable Gigabit Ethernet Switch by MPL
KEY FEATURES
- New version with Jumbo Frames support
- 5 port Gigabit Ethernet switch
- Fully manageable through web interface
- Copper and Fiber optic versions
- Stand alone and PC/104 stacked versions
- Low power & fanless operation
- Extended temperature option -40°C up to +85°C
OVERVIEW
The MAGBES family consists of 6 different manageable Gigabit Ethernet Switch models. The boards are PC/104 sized and offered as stand-alone, PC/104 stacked and special PIP built-in mechanical versions. They are available with different port configurations, either with 5 copper ports, or with 3 copper and 2 SFP optical transceiver ports.
Small form-factor pluggable (SFP) transceivers are available with a variety of different transmitter and receiver types. It allows the users to select the appropriate transceiver for each link to provide the required fiber optical interface.
As a managed switch the product gives access to various switch settings to configure features like: Quality of Service, VLAN, Rapid Spanning Tree, etc.. To adjust these switch settings, MPL provides a easy to use web interface.
SPECIFICATIONS
| Board Key Data | ||
|---|---|---|
| Ethernet Switch | 5-port manageable Gigabit Switch | lookup engine support up to 1024 MAC entries with automatic learning, aging |
| Copper Ports | on RJ45 and 2.54mm header (-1x & -2x) on RJ45 and 2mm lockable header (-11x & -12x) |
supports auto crossover, polarity correction |
| Fiber Ports | over standard SFP transceivers | supports single- and multi-mode data rate of 100Mbit or 1Gbit |
| Status LEDs | 2 LEDs for each copper port 1 LED for each SFP |
Link/Activity and Speed Link indicator |
| Special | Jumbo Frames up to 10kBytes supported on all new MAGBES versions (-11x & -12x) | |
| Physical/Power | ||
|---|---|---|
| Size (length x width x height) | 90.2 x 95.9 x 13.8 mm 120.0 x 95.9 x 13.8 mm |
PC/104 size (versions -xS and -xP) specific PIP built-in (version -xM) |
| Weight | 100 g / 0.22 lbs | fully equipped MAGBES-1S |
| Power | +5 VDC ± 5% | input over 3-pin power connector or PC/104 bus interface |
| Power consumption | Typically 4 W Typically 4 W Typically 3 W |
3 x 1GBit copper links and 2 x 1GBit optical links 5 x 1GBit copper links 5 x 100Mbit copper links |
| Temperature range | -20°C up to 60°C | optional -40°C up to +85°C |
| Humidity | 5% - 95% non condensing | optional bonding & coating available |
| Management Software | ||
|---|---|---|
|
ORDER INFORMATION
MAGBES Versions
| Reference | Mechanical Version | Ethernet Ports Configuration | ||
|---|---|---|---|---|
| Copper on RJ45 | SFP for Fiber optic | Copper on header | ||
| MAGBES-11S | Stand alone | 4 | 1 (2mm) | |
| MAGBES-12S | Stand alone | 2 | 2 | 1 (2mm) |
| MAGBES-13S | Stand alone | 3 | 1 | 1 (2mm) |
| MAGBES-11P | PC/104 stacked | 4 | 1 (2mm) | |
| MAGBES-12P | PC/104 stacked | 2 | 2 | 1 (2mm) |
| MAGBES-13P | PC/104 stacked | 3 | 1 | 1 (2mm) |
| MAGBES-11M | PIP built-in | 4 | 1 (2mm) | |
| MAGBES-12M | PIP built-in | 2 | 2 | 1 (2mm) |
Extended Temperature Option
| Reference | Description |
|---|---|
| XTEST-1 | Extended temperature test, -40°C up to +85°C |
For deployment in harsh environments, the MAGBES can be ordered in an extended temperature version. Every system needs to pass various tests in a climate chamber to prove that it will perform flawless over the temperature range indicated.
Accessories
| MAGBES-KIT1 | Cable and RJ45 adapter PCB for MAGBES, copper port on 2.54mm header (cable length 300mm) |
| MAGBES-KIT2 | Cable and RJ45 adapter PCB for MAGBES, copper port on 2mm header (cable length 300mm) |
| MAGBES-KIT3 | Ethernet cable 300mm long, 10 pin 2mm lockable socket to RJ45 connector. |
| Optional: MPL offers following SFP modules (others on request) | |
| SFP-1X | 1Gb SFP 850nm optical transceiver, multi mode, up to 500m, with standard LC connector, case temp. -40 to +85°C |
| SFP-2X | 1Gb SFP 1310nm optical transceiver, single mode, up to 10km, with standard LC connector, case temp. -40 to +85°C |
| SFP-3X | 100Mb SFP 1300nm optical transceiver, multi mode, up to 4km, with standard LC connector, case temp. -40 to +85°C |
Please note, not always all versions are available from stock.
In addition to the MAGBES switches, MPL provides a copper to fiber Ethernet Media converter, called TX2FX.
CONTACT US
Tusk Embedded Technologies
Toll free: 1.855.468.8875
Local: 604.200.7965
