GUARD-FS
Industrial Firewall / Router with Gigabit Switch by MPL
KEY FEATURES
- Wide Input voltage range (8 - 36VDC)
- Low power consumption (fanless operation)
- Optional -40°C up to +85°C
- All connectors on one side
- Customized housing (IP67, MIL, wall/flange/rack mount, etc.)
- Firewall/Router with 2x Gbit Ethernet ports (copper or SFP)
- Built in 4-port switch (copper and/or fiber ports)
OVERVIEW
With the GUARD-FS, MPL has integrated several systems into one housing, a Firewall, a VPN-Gateway, a Router, as well as an Ethernet Switch with your choice of copper and/or fiber ports. You can imagine the broad use of the GUARD-FS with this variety of functionality. Basically in any application that needs to be installed in a rugged rough environment where space is an issue, the GUARD-FS is a perfect fit. Today, everything is getting automated. Therefore security in this automated world is becoming more and more important. The key differences of industrial applications are that they require a long-term availability due to the life cycle management of the investments.
The GUARD-FS Highlights
The system can be operated from -20°C to +60°C (optional -40°C to +85°C), without the need of a fan or case openings. The capability to offer copper as well as SFP ports for various fiber optical solutions make the product universal. This versatility is supported by the availability of a software development kit, Customized versions like IP67 housing, MIL connectors, wall/flange/19" rack mount will be offered as well.
The GUARD-FS is the ideal solution for industrial, transportation and defense applications where security, quality, reliability, low power consumption, and long-term availability are key. Just to name a few, the GUARD-FS can be used for applications such as remote monitoring & maintenance, secure communication in automation, etc..
SPECIFICATIONS
| Board Key Data | ||
|---|---|---|
| Processor | RISC SoC 1.2GHz | Low Power CPU |
| Memory | 512MByte DDR2 | Soldered OnBoard |
| Firmware | 512MByte NAND Flash | Soldered OnBoard |
| Interfaces | ||
| Firewall: 2 x Ethernet |
2 x RJ45 connector, auto negotiation, auto MDI MDIX 2 x SFP Slot |
Either 10BaseT /100BaseTX / 1000BaseTX or 100Base-FX or 1000Base-LX SFP Modules |
| Switch: 4 x Ethernet |
*4 x RJ45 copper ports or *3 x RJ45 and 1 x SFP or *2 x RJ45 and 2 x SFP |
Either 10BaseT /100BaseTX / 1000BaseTX or 100Base-FX or 1000Base-LX SFP Modules (* configuration depends on version ordered) |
| Physical / Power | ||
| Chassis | Compact rugged chromated Aluminum with stainless steel plates |
DIN-rail or flange mounting, no ventilation holes |
| Size & Weight | 62.1 x 162.1 x 118mm | |
| Power | 8 - 36VDC | |
| Temperature Range | -20°C up to +60°C optionally -40°C to +85°C | No fan, no openings, values at full CPU load |
| Humidity | 5% - 95% non-condensing | Optional coating available |
| Standard Compliance | ||
| The GUARD-FS is designed to meet or exceed the most common standards. Particular references are: | ||
| EMC | EN 55022, EN 55024, EN 61000, MIL-STD-461E | |
| Shock & Vibration | EN 60068 | |
| Environmental & Safety | EN 50155, MIL-STD-810-F, EN 60601, EN 60950 | |
| Software | ||||
|---|---|---|---|---|
The Guard-FS uses an adapted version of OpenWRT (http://www.openwrt.org) for providing all the basic Firewall functionality. Since OpenWRT is an open source firewall software, all sources including the adaptions required for the GUARD-FS are available in source code. This allows for security reviews down to code level for high security applications.The basic functionality provided by the default installation can be extended via a multitude of mandatory software packages that allow extending the functionality of the GUARD-FS. These packages include support for various routing protocols, proxy servers, IPV6 over IPV4 tunnels, intrusion detection, web servers and so on. As an additional benefit, a software development kit will be made available which allows the implementation of customer specific functionality into the base system of the GUARD-FS.Most of the configuration of the firmware installed can be done using a web based interface. For more specialized requirements, a console based configuration utility is available. All configuration is stored on the device in a human friendly text format and can be modified using a text editor, too.
|
||||
ORDER INFORMATION
| Reference | Description |
|---|---|
| GUARD-FS1 | Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port switch (MAGBES-13) with 3x RJ45 and 1x SFP port, preinstalled OpenWRT embedded Linux. (Housing has to be added separately) |
| GUARD-FS2 | Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port Switch (MAGBES-12) with 2x RJ45 and 2x SFP ports, preinstalled OpenWRT embedded Linux. (Housing has to be added separately) |
| GUARD-FS3 | Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port switch (MAGBES-11) with 4x RJ45, preinstalled OpenWRT embedded Linux. (Housing has to be added separately) |
| GUARD-Cx | GUARD Solution assembled & mounted according the customer needs & requirements (e.g. with special housing, depopulated parts, installing a customers application, ....) |
| GUARD Housing | |
| GUARD 62-1 | Ultra Compact Housing with internally chromated Aluminum and stainless steel plates. Housing size: 62.1 x 162.1 x 118mm (W x D x H), DIN-Rail, external Aluminum is RAL7016 powder coated. |
| GUARD 62-2 | Ultra Compact Housing with internally chromated Aluminum and stainless steel plates. Housing size: 62.1 x 162.1 x 118mm (W x D x H); Wall mounting plate for 4 screws |
CONTACT US
Tusk Embedded Technologies
Toll free: 1.855.468.8875
Local: 604.200.7965
